Setting Up Driver Accessorials and Charge Profiles

This article provides step-by-step guidance on how to configure various driver pay accessorials using charge profiles. These accessorials may include detention, layover, stop-off, chassis split, and other pay types specific to driver activity. Proper setup ensures accurate and consistent compensation for drivers based on operational scenarios and customer billing rules.

Prepull

If you have multiple yards that all pay the same, you can remove "by event" and instead add a rule for "Drop Location."

Fuel


Based on can pull the percentage from either the Invoice (the customer invoice) or the Driver Charges (the carrier base pay).

For prepull fuel, you would add the "By event" and rule from the prepull combined with the fuel percentage above. You can have fuel for specific deliveries or one way moves by using the "by event" if one location should trigger the pay or "by move" if multiple events will trigger the pay.

Chassis Split

Pick Up


Return

Waiting Time at Consignee

Please note we also have per 15 min, per 30 min, etc. as time units if your waiting time agreement is not per hour increments.

Detention at Port/Rail Pick Up

Detention at Port/Rail Return

Overweight


The commodities weight and container size are optional,

Hazmat

Bobtail / Stopoff

The stopoff rule is not needed for bobtails if support moves are enabled and the system is set to auto-recognize when a bobtail occurs.

For customized routing with stopoffs, only the super admin can add the stopoff options available in the rules section of General Info.

The genset rule is optional.